How to Make Tile Floors Shine Without Wax

To boost the appearance of tile floors, waxing is the widely used method of course. Over a short period of time, a layer of grime will start building on your tile floor. There are a handful of ways to clean and make tile floors shine without wax or other chemical products.

5 ways to make tile floors shine without wax

Tile floors are very common to use in kitchens and bathrooms. Eventually tile floors become dirty and will loose their shine. Tile floors become unattractive due to dirt and stains commonly transferred from shoes.

Wax is known to improve the appearance of the tile floors, but it eventually builds up and forms unattractive residue. Fortunately, simple and natural products are capable of making tile products shine without the need for wax.

It is important to note that before the process of cleaning, furniture should be removed from the floor if possible. If not, the furniture should be pushed against the wall. Also the floor must be dusted or swept to remove dirt and dust. Removing furniture, or pushing it against the wall, will help make the cleaning process easier.

Use White Vinegar & Dishwashing Liquid Solution to Make Tile Floors Shine Without Wax

If you are frugal you may try something from your kitchen to clean your tile floors. White vinegar is undoubtedly the best cleaning agent for your tile floor without using a bunch of elbow grease.

Mix a cup of white vinegar and a tablespoon of dishwashing liquid in one gallon of warm water. Then soak a mop or towel in it. You can also use a spray bottle if you want to clean a specific area. Spray or mop floor in sections, followed by steam mopping. Start at the back of the room and work backwards to the front of the room. Once finished leave the room for 10 or so minutes for it to dry.

Baking Soda, Hydrogen Peroxide & Lemon Juice

Don’t spoil your whole weekend cleaning your floor. Baking soda in combination with hydrogen peroxide and fresh lemon juice will save you time and money. This combo does a great job cutting through dirt and grime.

Mix the baking soda into hot water along with hydrogen peroxide and fresh lemon juice. You can also add some liquid soap and make a thin paste of all these ingredients. Apply the solution to the surface you want to clean and let it stay there for about 10 minutes or so and mop it off after that and you’ll see it has left no sticky residue or soap scum like other multi-surface cleaners do. Turn on your ceiling fans and let the floor dry before starting foot traffic. This home hack would bring life back into your tile floors.

Ammonia Solution

The household ammonia is one of the best home solutions to battle with deep-seated dirt and grime along with killing germs and bacteria. To eliminate the odor, you may add fresh lavender.

A few drops of ammonia are sufficient for a one-time cleaning process no matter how tough you have stains on your floor. Take warm water in a bucket and mix a little bit of ammonia along with any of your favorite essential oil or fresh lavender. So now you disinfect as you clean with a slight odor of lavender and the smell doesn’t send you running.

Once the solution is prepared, soak the mop in the bucket and wring it thoroughly and clean the floor until all the stains disappear. Even if the stains are still showing up, you can dip a sponge into the solution and scrub it on the required area.

After cleansing the floor, wash it with clean warm water, so that any leftover residue gets flushed out. This method will definitely restore the sheen of your floors and you don’t have to get embarrassed even if any of your acquaintance spay a surprise visit.

Soap, Lemon and Water

The simplest yet very effective home remedy to acquire the desired shine of your tile floor is using any kind of liquid dish-washing soap, a couple of lemons, and hot water. This method is cost-efficient, eco-friendly, chemical-free, and very easy to clean the greasy elements from your tile surface.

Carry out dry cleaning with a broom or vacuum cleaner before proceeding with this method so that you catch up large grime from the floor and then mix dish-washing soap in hot water and squeeze a couple of lemons in the solution.

Drench the mop in that solution and sweep it all around. Scrub the area with a sponge where normal mopping left the stains and you’d witness your floor clean without any residue left behind. After a thorough cleaning, spill hot water over the surface and drain all the water which will leave only the clean and shining surface. Switch on the overhead fan to let the surface dry quickly.

High Gloss Tile Sealer

Once your tile floors are cleaned using any of the natural options, a high gloss tile sealer can be applied on the tile floor to give it a little extra shine. In addition, the high gloss tile sealer helps protect the tile floors to keep them looking great even longer.

If the high gloss sealer is intended to be used on ceramic tile, it should be tested out on a sample tile or in a hidden area first to make sure it bonds well, as the non-porous ceramic surface can cause issues.

A topical sealer can become scratched or fade over time, so the results may not last. If the sealer becomes scratched or faded, it can be stripped and reapplied.

Final Thoughts about Making Tile Floors Shine Without Wax

The longer you leave your floor especially your kitchen tiles at the mercy of all types of scum, the harder it would become to clean them and restore the original shine of your tiles without wax. Kitchen tiles, in my view, are the most vulnerable area in everyone’s homes. They are subject to spills and high foot traffic and need special care to keep them clean.

Applying the above-discussed methods could help you attain the required neatness, get rid of harmful fungus and molds and preserving your investment. Other than normal brief cleaning, use the above-mentioned tips at least a couple of times every month and make your living scum-free.

Recommended Articles

Leave a Reply